Trebor SS85 Surge Suppressor - Manual (Page 3)

SS85 SURGE OPERATION / MAINTENANCE MANUAL PAGE 3
1 INSTALLATION
1.1 UNPACKING
After unpacking, the surge suppressor should be checked for any damage that
may have occurred during shipment. Damage should be reported to the carrier
immediately.
The following items should be included within the shipping container:
Qty Item Description
1 SS85 SS85 Surge Suppressor
(assembly including seal and reducer)
1 MSS85 Operation/Maintenance Manual
1 ** Seal, Port
**Dependent upon type of pump option selected.
1.2 LOCATING / MOUNTING SURGE
 Remove port plug from pump.
 Install new port seal.
 Hand tighten surge suppressor into port. Do not over tighten.
ATTENTION: Over-tightening adapter into pump will result in pump damage.
When using the Surge Suppressor in a mounting tee, the suppressor chamber
should be oriented with the threads down. (See Section 2.1.)
1.2.a Mounted
(21.77)
8.57
(Ш11.43)
Ш4.50
IN
(CM)
MTD0397
Figure 1-1