Trail Master Suspension TM401_TM401N 2004– 2013 FORD F-150 2WD/4WD 2.0 FRONT SPACER KIT - Manual (Page 5)

TM401 & TM401N
Revised
8.9.13
5
11. Remove the CV axle end nut. Save for rein-
stallation.
12. Unbolt the upper ball joint nut, but do not
remove it from the knuckle. Separate using
the appropriate tool.
13. Remove upper ball joint nut to free the axle.
Save hardware for reinstallation.
14. Carefully remove the CV axles from the hub.
15. Remove the lower strut bolt from the lower
control arm. Save the hardware for reinstalla-
tion. Be sure to note the direction of the bolt
for reinstallation.
16. Remove (3) upper strut tower nuts holding
the strut assembly to the strut tower. Save the
hardware for reinstallation.
17. Remove the strut assembly from the vehicle.
18. Install the strut spacer (94-8087m) onto the
OE strut mounting studs. Secure with the
previously removed OE nuts. Torque the
nuts to factory specifications.
NOTE: Be sure to use thread locker on
the OE nuts.
19. Install the strut assembly into the strut tower
Sway Bar
End Link
CV Axle Nut
Upper Ball
Joint
Lower Strut
Mount Bolt
Upper Strut
Mount Nuts
94-8087m
Strut
Spacer