Install front suspension – Trail Master Suspension TM403N FORD F-150 4WD SUSPENSION LIFT KIT User Manual

Page 5

TM403N

Revised

12.5.13

tion 1.

IMPORTANT!: For 2010-UP mod-

els ONLY, the front of the passenger
side rear A-arm pocket will need to
be trimmed approximately 1/4” in or-
der to install the rear crossmember.
See ILLUSTRATION 1a.

23. Using a suitable cutting tool, (abrasive

cutoff wheel, Sawz-all, etc.) cut the
frame along the previously marked lines
as shown in Illustration 1 & 1a (For
2010 Models only). After cutting the
section out of the frame, clean the area
thoroughly and paint the exposed metal
with a good quality paint.

Install Front Suspension

1. Install the driver side and passenger

side front differential drop brackets 82-
5526 drvr and pass) to the frame with
the previously removed OE bolts and
hardware. Leave the bolts loose. See
Illustration 2.

NOTE: The jog in the brackets will

face towards the front of the truck.

OE Bolt

9/16” X

4” Bolt

Differential

Front

Diff Drop

Brackets

82-5526

Illustration 2

Front Diff Brackets

Illustration 1

Drvr Side Frame

Cut

Cut Piece

3 3/4”

Cut
Mark

Rear
Crossmember
Mounting
Pocket

Front View

Side View

82-5504 Rear

Crossmember

1/4”

Cut Piece

Front of Passenger Side

Rear A-arm Pocket

Illustration 1a

Pass Side Frame

Cut

2010-UP Models ONLY!