Clarke RS-16 - Manual (Page 6)

EN ENGLISH
-6- Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC
HOW TO PREPARE THE MACHINE FOR
OPERATION
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the
shipping carton and the machine for damage. If
damage is evident, save the shipping carton so that
it can be inspected. Contact the Clarke Customer
Service Department.
KNOW YOUR MACHINE (Figure 1)
1 Operator Handle Grips
2 Switch Lever Safety Lock Button
3 Switch Levers - Squeeze - ON / Release -
OFF
4 Handle Release Compression Lever
5 Power Cord
6 Operator Handle
7 Cord Hook
8 Skirt (RS-16 DC)
WARNING! This machine contains mov-
ing parts. To reduce the risk
of injury, always unplug the
power cord before servicing.
INSTALLING THE PAD DRIVER
1. Align the lugs with the corresponding slots in the
pad driver and turn the pad driver counterclock-
wise to lock it in place (figure 2). To remove pad
driver, give it a quick hard turn clockwise.
CAUTION! Using the wrong pad on this
machine can overload the
motor.
2. Install skirt (RS-16 DC) as shown in figure 1,
item 8; stiffening the strip down.
Figure 1
Figure 2
4
3
1
5
7
Lugs
Slots
LENGÜETAS
RANURAS
TENONS
FENTES
2
6
8