Clarke Alto MP-1800 User Manual
Operator's manual
Form No. 70193A
4/01
CLARKE TECHNOLOGY
Printed in the U.S.A.
READ THIS BOOK
CAUTION: Read the Operator's Manual before using the appliance.
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your ALTO
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If your
operator cannot read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: ALTO U. S. Inc., 2100 Highway 265, Springdale, Arkansas 72764.
MP-1800
120V
Marble
Polisher
Operator's Manual
Libro De Instrucciones
Manuel D’utilisation
Document Outline
- Operator's Manual
- CONTENTS OF THIS BOOK
- OPERATOR SAFETY INSTRUCTIONS
- MACHINE INTRODUCTION
- ACCESSORIES
- Machine Specifications
- HOW TO PREPARE THE MACHINE FOR OPERATION
- 120 VOLT MACHINES
- HOW TO OPERATE THE MACHINE
- Parts and Service Manual
- MAINTENANCE
- Assembly Drawing
- Assembly Drawing Parts List
- Gearbox Assembly Drawing & Parts List
- Wiring Diagram 120V-60Hz
- ALTO® PRODUCT SUPPORT BRANCHES
- CLARKE TECHNOLOGY LIMITED WARRANTY (U.S. only)