SWIT Electronics S-1051C - Manual (Page 5)

2. Panel Instruction
2.1 Front view
① : Power on/off
Connect with power cable or mount battery, press the “ ” and the power indicator is turned on and
after 10 seconds, the monitor will be switched on and get into normal working status. Press the “ ”
again, the indicator is turned off and monitor is switched off.
Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of
time.
② F1: User definable function key 1
③ F2: User definable function key 2
④ FOCUS: Peaking focus assist switch on/off
Press “FOCUS” once, it will display the current peaking on/off status. Press “FOCUS” again to switch
on/off the focus assist line
⑤ F.COLOR: False color switch on/off
Press “F.COLOR” once, it will display the current false color on/off status. Press “F.COLOR” again to
switch on/off the false color mode.
⑥ DISPLAY: Display current settings
Press “Display” to display safety mark, title and the current input signal information
⑦ MENU: Press to enter Menu
⑧ OK: Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system,
directly revolve “OK” to adjust volume.