Stealth Cam STC-I530IR Nomad-IR - Manual (Page 26)

STC-I530IR
www.stealthcam.net Toll Free 877-269-8490
26

Your camera is preset to NTSC TV out system by default. If
the handheld TV screen does not flicker, then you do not need
to set your TV out system. Proceed to the Thumbnail image
section below. If the handheld TV screen flickers, then you will
need to proceed to the next step to set up your TV out to PAL
system.
 Press the [MENU] button once. The word “ tu “ on the
cam
era’s internal screen will blink first. Press [OK] once and
now you’ll see “ tu – n “ blinking.

Press [DN] button to select TV out in PAL System (which is use
in most European and Asian countries). The word “ tu – P ” will
now be blinking. Press [OK] to confirm this setting.

Press [MENU] to exit. When you see the status screen appear
power off the camera. Wait for 5 seconds and then power up
your camera again.