Stealth Cam STC-I530IR Nomad-IR - Manual (Page 15)

STC-I530IR
www.stealthcam.net Toll Free 877-269-8490
15
Programming the Stealth Cam
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode.
If MENU button is not pressed within 30 seconds, camera will
automatically enter PIR detection mode.
Set the Resolution: The first program setting is resolution. The word
RESOLUTION will be blinking.

Press [OK] button to choose the selection.

Press the [UP] or [DN] button to select the desired resolution
(HIGH/LOW/BASE) and press [OK] to save and exit to
CAPTURING setting
Set the Capturing sequence. Your Stealth Cam can program to
shoot 1~9 pictures per triggering.

The word CAMERA will be blinking.

Press [OK] button to choose picture mode, then press the [UP]
or [DN] button to select the desired capture setting (number of
pictures per triggering).