Stealth Cam STC-I540IR - Manual (Page 21)

STC-I540IR
www.stealthcam.net Toll Free 877-269-8490 21
Stealth Cam Settings – Burst Mode Technology
Stealth Cam digital cameras put you ahead of the game allowing
you to set and Capture sequences by programming 1-9 pictures
per triggering, or 10 -180 seconds of video.
To Program Still Image Burst Mode:
Slide the power switch from Off to Test position.
You will hear 2 consecutive short beeps follow by a 3
rd
beep. Press
Menu button once and you will see the camera icon flashing. Press OK
to confirm this option. Now press the DOWN button six times to scroll
through all of the icon settings. You will now see the burst mode digit
flashing.
Press Right button to select from 1 to 9 photos taken in sequence when
the camera is triggered.
Press OK to confirm your Burst Mode photo setting.
Press the Down button to select the Time Out interval in minutes (1-60
min).