Stealth Cam STC-I590 - Manual (Page 34)

STC-I590
www.stealthcam.net Toll Free 877-269-8490 34
video OUT jack on the camera. Insert the other end into the RCA
video IN jack on the TV. Make sure to switch to VIDEO IN mode
on your TV. (See your TV owner’s manual for directions)
Turn on the TV monitor and slide the camera power switch to TEST.
• Your camera is preset to NTSC TV out system by default.
• Press the OK button on the camera. This will display the last
image captured.
• Using the LEFT/RIGHT buttons to select the image you wish to
view. Image number and total number of images in memory
will display on the center bottom of the screen.
• Once you have selected the image you wish to view, press the
UP button. This will magnify the image on the screen.
• Using LEFT/RIGHT/UP/DOWN buttons, you can move the
image to display different areas of the image.
• To return to the image selection view from the magnified image
screen, press the OK button.
Viewing AVI Clip on a hand held TV or home TV monitor
• Follow the cable attaching instruction listed in the hand held TV