Stealth Cam STC-I590 - Manual (Page 28)

STC-I590
www.stealthcam.net Toll Free 877-269-8490 28
Using the Camera in PIR Detection Mode
• Mount the camera to a tree or other sturdy object using the
supplied mounting strap. (Please refer to the mounting
suggestions section in this manual)
• Open the front housing and slide the Toggle switch from OFF
to TEST position. You will hear two short consecutive beeps
followed by a third beep.
• The default setting of your Flash mode is set to Auto-Flash.
• The Auto-Flash icon will appear at the top right corner of the
LCD screen.
• To turn off Flash mode, press the LEFT button once. The flash
icon will disappear. To return to auto flash mode, press the
LEFT button one more time.
• Move the switch from Test to ON position to activate your PIR
mode.
• The camera’s green LED light will begin blinking and enter
count down mode. This is your indication to leave the coverage
area within one minute.
• After one minute, the camera will take between 1~9 pictures, or