Stealth Cam STC-I450 - Manual (Page 27)

STC-I450
www.stealthcam.net Toll Free 877-269-8490 27
• Your camera is preset to NTSC TV out system by default. If
the handheld TV screen does not flicker, then you do not need
to set your TV out system. If the handheld TV screen flicker,
then you will need to proceed to the next step to set up your TV
out to PAL system.
• Press the [MENU] button once. This will bring up the word
{dEL} on the camera’s internal LCD screen.
• When you see the word {dEL} blinking, press [UP] button to
enter TV out setting mode.
• The word {tu} will be blinking. Press [OK]. The display {tu – n}
will be blinking.
• Press [DN] button to select TV out in PAL System (which is use
in most European and Asian countries). The word {tu – P} will
be blinking.
• Press [OK] to confirm setting.
• Press [MENU] to exit and continue with your image viewing.