Stealth Cam STC-I450 - Manual (Page 15)

STC-I450
www.stealthcam.net Toll Free 877-269-8490 15
Programming the Stealth Cam STC-I450
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode.
If MENU button is not pressed within 30 seconds, camera will
automatically enter PIR detection mode.
Set the Resolution: The first program setting is resolution. The word
RESOLUTION will be blinking
• Press [OK] button to choose the selection
• Press the [UP] or [DN] button to select the desired resolution
(HIGH/LOW/BASE) and press [OK] to save and exit to
CAPTURING setting
Set the Capturing sequence. The Stealth Cam STC-I450 can be
programmed to shoot 1~9 pictures per triggering or 5~90 seconds
of video.
• This word CAMERA will be blinking
• Press [OK] button to choose picture mode then press the [UP]
or [DN] button to select the desired capture setting (number of