Stealth Cam STC-WD3RT I330RT - Manual (Page 31)

STC-WD3RT
www.stealthcam.net Toll Free 877-269-8490 31
Using the camera by manual shoot.
• Open the front housing and turn the camera on.
• Program the capture mode to manual (Please refer to Program
& Set up section on page 11 of this manual)
• Close the front housing.
• The camera is now ready to be used as hand held point and
shoot camera.
• Use the optical viewfinder to align your shot then press the
shutter button.
• When taking nighttime pictures allow approximately 6 seconds
between shots to allow the flash to charge. In case of low
battery power, it will take longer to charge the flash between
pictures.