Stealth Cam STC-WD3RT I330RT - Manual (Page 27)

STC-WD3RT
www.stealthcam.net Toll Free 877-269-8490 27
Testing the camera coverage area.
One of STC-WD3RT Cam’s many features is the ability to test
the coverage area.
• After mounting the camera, open front housing and slide the
power to ON.
• After the font LCD screen has powered on. Press the [TEST]
button (this must be done with in 30 seconds or the camera will
enter count down mode)
• Close the front housing.
• Walk around in the front of the camera to see if you have
mounted camera in the proper position. A green indicator light
on the front will blink on when you have intruded the coverage
area.
• Adjust the camera position as needed and repeat testing until
the desired coverage area is achieved.