Stealth Cam STC-WD2 I230 - Manual (Page 19)

STC-WD2
www.stealthcam.net Toll Free 877-269-8490 19
• Press [OK] to confirm and exit to RESOLUTION setting
• If you choose Delete One or Delete All, you will remain in this
mode until you press [DN] button to move the selection to No
Delete then press [OK] to exit to Resolution setting.
• Press [MENU] to exit to power on status.
Once all settings have been completed press the [MENU] button
to return to CAMERA STATUS screen.
At the end of each program set up selection, you may press
[MENU] to exit and return to camera status ready for the 1
minute count down mode to enter PIR capturing.