Stealth Cam STC-WD2IR I230IR - Manual (Page 11)

STC-WD2-IR
www.stealthcam.net Toll Free 877-269-8490 11
Memory Options
Your STC-WD2-IR camera is equipped with 16MB built in flash
memory. The camera is also equipped with an expendable
media card slot capable accepting up to 2GB SD card (sold
separately). With no memory card inserted into the slot, the
camera will use the built in 16MB memory. If a SD card is
inserted into the slot then the camera will bypass the built in
memory and utilize the SD memory. The front counter display will
show the number of images on the built in memory unless the
expansion card is inserted at which point the counter will only
show the number of images in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or
removing memory.
• Insert SD memory card in to the SD card slot completely and in
the correct direction as shown by the sticker located at the side
of the housing.
• To remove the SD memory card, depress the SD card and pull