Stealth Cam STC-WD2IR I230IR - Manual (Page 10)

STC-WD2-IR
www.stealthcam.net Toll Free 877-269-8490 10
12V Lead Acid external battery
The STC-WD2-IR is equipped with an external power jack
designed to accept a barrel plug cable to attach to a sealed lead
acid battery. (Sold separately). Battery cable and complete 12V
Lead Acid battery kits are available wherever Stealth Cam scouting
cameras are sold or call toll free 877-269-8490. Only Stealth Cam
external battery accessories are recommended.
• Make sure the camera power switch is OFF and power source
switch on BATTERY.
• Insert the battery pack plug into the DC 12V jack of the bottom
of camera housing
• Turn the camera power on.
Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will
damage the camera.