Stealth Cam STC-V450 - Manual (Page 16)

STC-V450
www.stealthcam.net Toll Free 877-269-8490 16
Set the Capturing sequence. The Stealth Cam STC-V450 can be
programmed to shoot 1-9 pictures per triggering or 5 to 90
seconds of adjustable video.
• Power on the unit, press the [MENU] button to bring up the
menu on the LCD screen.
• Press [UP] or [DN] to highlight CAPTURE
• Then press the [OK] button to enter capture setting.
• Press the [UP] or [DN] button to select the desired capture
setting (number of pictures per triggering or video clip) If burst
mode is selected, press the [OK] to save and it will exit to
SETTING SCREEN. If VIDEO is selected, press the [OK] to
enter video time setting. Use [UP] or [DN] button to enter the
desired video length in 5 second increment. Press [OK] to
save the setting and exit to the SETTING SCREEN.
• Use the UP and DOWN buttons to select additional program
settings or press [MENU] again to exit the SETTING SCREEN.