Stealth Cam STC-V450 - Manual (Page 15)

STC-V450
www.stealthcam.net Toll Free 877-269-8490 15
Programming the Stealth Cam STC-V450
Switch the camera to the ON position. Once the Camera status screen
is visible press the MENU button. This will bring up the SETTING
screen. Capture mode / Resolution / Time out / TV System / Date &
Time settings are all performed in this menu.
* NOTE: If no buttons are pressed within 30 seconds during any of
the programming mode, the unit will return to 1-minute count
down mode then start PIR capturing.