Stealth Cam STC-V650MTR Sniper - Manual (Page 18)

STC-V650
www.stealthcam.net Toll Free 877-269-8490 18
Set the Capturing sequence. The Stealth Cam STC-V650 can be
programmed to shoot 1-9 pictures per triggering or 5~90 seconds
of video.
• Power on the unit, press the [MENU] button to bring up the
menu on the LCD screen.
• Press [UP] or [DN] to highlight CAPTURE mode.
• Then press the [OK] button to enter capture setting.
• Press the [UP] or [DN] button to select the desired capture
setting (number of pictures per triggering) and press the [OK]
button to save. You will be returned to the SETTING SCREEN
menu.
• Use the UP and DOWN buttons to select additional program
settings, or press [MENU] again to exit the SETTING SCREEN.
Set the Resolution:
• Press the [UP] or [DN] to highlight RESOLUTION.
• Then press the [OK] button to enter the resolution settings.
• Press the [UP] or [DN] button to select the desired resolution
and press [OK] to save.