Stealth Cam STC-V650MTR Sniper - Manual (Page 17)

STC-V650
www.stealthcam.net Toll Free 877-269-8490 17
If no buttons are pressed after 30 seconds, the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display
screen, press and hold the UP or DOWN button until the status
screen appears.
Programming the Stealth Cam STC-V650
Switch the camera to the ON position. Once the Camera status screen
is visible, press the MENU button. This will bring up the SETTING
screen. Capture mode / Resolution / Time out / TV System / Date &
Time settings are all performed in this menu.
Setting
> Capture mode
Resolution
Time out
TV system
Date and Time