Connecting to a wireless network – SKYTEX 727 User Manual

Page 11

NOTE: To connect your Tablet to the Internet you must have an Internet connection and a wireless network.

Open the App Tray > Select ‘Settings’ > Switch the ‘Wi-Fi’ option from ‘OFF’ to ‘ON’ by tapping the
‘OFF’ icon.

A list of networks will appear to the right of the screen > Select your network and enter the
password/network key.

Tap ‘Connect’ to complete the connection

Tip: Check the “Show Password” box to verify password was entered correctly.

CONNECTING TO A WIRELESS NETWORK

NOTE: If you are connected to network
previously used with this tablet, it will
automatically connect.
If you don’t see your network in the list,
tap the SCAN icon located on the top
right corner of the screen.

REQUIREMENT: To connect you will
require a wireless router or an access
point through a broadband internet
connection. You must know the name
of your network password and if your
network is secured. Settings of this
nature may be found on your wireless
router and/or its user guide.