RiME LITE Mira - Manual (Page 8)

8
Operation Instruction for MIRA
A. Insert a power cord into the main Inlet.
B. Turn the power switch ON
C. Before switching off, better to set all buttons & indicators to “Minimum” or “OFF”
Adjusting Flash Output
1. How to adjust Flash Power Output
1. Press SELECT button, then you will see “Green LED” right next to SELECT button and FND Display will show “F-,-“.
2. Set Flash output you want by pressing UP or Down buttons
3. Check by Pressing TEST Button.
4. Once “Blue LED” next to TEST Button will be on, it means flash is charged.