RiME LITE Mira - Manual (Page 12)

12
1. TEST Button
- If you press the TEST button, Flash will fire.
- Once a flash is charged, “Blue LED” will be on
2. CELL Button
- If you press the CELL button, you will see “Blue LED”, then it is slaved by other fires.
- Press CELL button again, it will be OFF.
3. SOUND Button
- If you press the SND button, the sound will be ON.
- If you press the SND button again, the sound will be OFF
4. Synchro Socket
- Insert a synchro cord into Synchro Socket
- Connect the synchro cable on Camera
- The flash will fire as camera
shutter