RiME LITE Storm - Manual (Page 10)

10
Check list when troubling
1. Cannot turn on the power.
1) Please check the power switch on.
2) Please check the power cable inserted correctly.
2. Unit does not flash.
1) Please check the flash tube inserted correctly.
2) Please check the trigger coil contacted with the flash tube legs.
3) Please change the flash tube.
3. Unit does not recharge.
1) Please check the power cable inserted correctly.
2) Please check the unit voltage supplies it correct.
3) Please change the fuse.
4. Ready “beep” does not sound.
1) Please check the “SOUND” button pressed.
2) Please make sure the unit fully recharging.
5. Unit does not fire from sync connection or transmitter or remote control.
1) Check the sync cord or receiver is inserted correctly.
2) Try another sync cord or wireless system.
6. Unit sounds long “beep” sound.
1) It has been started in “overheat” mode and it turns off automatically. After a break for cooling down (from 5 min. to 10 min.),
you can turn it on again.