Richter NKP Series Butterfly Valves - Manual (Page 4)

Series NKL, NKLP, NKS, NKSP, NK, NKP
Page 4
9520-070-en Revision 04
TM 7113 Edition 05/2008
Shut-off and control butterfly valve with sandwich-type body
NKS/F Disc/stem unit of PFA, with lockable hand lever or worm gear
with manual actuation
NKSP/F Disc/stem unit of PFA, with actuator
NKS/F-S Disc/stem unit of stainless steel, with lockable hand lever or worm gear
with manual actuation
NKSP/F-S Disc/stem unit of stainless steel, with actuator
NKS/F-H Disc/stem unit of Hastelloy C4, with lockable hand lever or worm gear
with manual actuation
NKSP/F-H Disc/stem unit of Hastelloy C4, with actuator
Shut-off and control butterfly valve with double-flange body
NK/F Disc/stem unit of PFA, with lockable hand lever or worm gear
with manual actuation
NKP/F Disc/stem unit of PFA, with actuator
NK/F-S Disc/stem unit of stainless steel, with lockable hand lever or worm gear
with manual actuation
NKP/F-S Disc/stem unit of stainless steel, with actuator
NK/F-H
Disc/stem unit of Hastelloy C4, with lockable hand lever or worm gear
with manual actuation
NKP/F-H Disc/stem unit of Hastelloy C4, with actuator
For material designation on the name plate, see Section 1.2
1.2 Name plate, CE and body markings
The stainless steel name plate is undetachably riveted
to the body.
If the operator attaches his identification, it must be
ensured that the valve matches the application in
question.
Example of name plate with CE marking:
Body identification :
The following are visible on the body according to DIN
EN 19 and AD 2000 A4:
Nominal size
Rated pressure
Body material
Manufacturer's identification
Melt number/Foundry identification
Cast date
Sign for transport securing device for actuator