Richter GS Series Strainers - Manual (Page 3)

Series GS
Page 3
9540-060-en Revision 05
TM 6506 Edition 05/2006
1 Technical data
Manufacturer:
Richter Chemie-Technik GmbH
Otto-Schott-Str. 2
D-47906 Kempen
Telephone : +49 (0) 2152 146-0
Fax:
+49 (0) 2152 146-190
E-Mail : [email protected]
Internet: http://www.richter-ct.com
Designation :
Strainer, series GS
Certified to Clean Air Act (TA Luft)
Strength and tightness (P10, P11) of the pressure-
bearing body tested to DIN EN 12266-1.
Face to face and flange connecting dimensions
alternatively:
EN 558-1 basic series 1, ISO 5752 series 1
with flanges DIN EN 1092-2, type B (ISO 7005-2
Type B) PN 16 or flanges drilled to ASME B16.5
Class 150
ANSI/ISA-75.08.01, Class 150 with flanges ASME
B16.5 Class 150, raised face
Materials :
Body material: Ductile cast iron EN-JS 1049 to DIN EN
1563 (0.7043 DIN 1693) or ASTM A395
Lining material: PFA/PTFE
.../F
On request: antistatic …/F-L
highly permeation-resistant …/F-P
Strainer basket: TFM 1600
Filter web:
ETFE
Temperature range : – 60 °C to + 150 °C
See pressure-temperature diagram in Section 1.3.
Operating pressure: from vacuum to max. 16 bar
See pressure-temperature diagram in Section 1.3.
Pressure drop : Ep (=p
1
– p
2
). max. 2bar ( 100 °C)
max. 1 bar at 150 °C
Strainer size :
DN 15, 20, 25, 40, 50, 65, 80, 100
ASME ½“, ¾“, 1“, 1½“, 2“, 3“, 4“
Mesh size : 85, 105, 250, 500, 1000, 1500 1800,
2000 µm
Weight:
Nom.
size
15 20 25 40 50 65 80 100
ASME ½“ ¾“ 1“ 1½“ 2“ --- 3“ 4“
ca. kg 6 6 11 17 19 20 39 44
Installation position:
A direction arrow on the shell indicates the direction of
flow. See Section 6.2.
Dimensions and individual parts:
See sectional drawing in Section 10
Option : Draining
Wear parts: Filter web, strainer basket
1.1 Name plate, CE and body
markings
The stainless steel name plate is firmly riveted to the
body.
If the operator attaches his identification, it must be
ensured that the valve matches the application in
question.
Example of name plate with CE marking
No CE marking is permissible for the sizes 15, 20 and
25; the name plate therefore has no CE marking.
Body identification:
The following are visible on the body according to DIN
EN 19 and AD 2000 A4:
Nominal size
Rated pressure
Body material
Manufacturer's identification
Melt number/Foundry identification
Cast date
Arrow for direction of flow