CyberData 4-Port PoweredUSB 2.0 Hub 011006 - Manual (Page 10)

CyberData Corporation 930232A Operations Guide
Installing and Using the 4-Port PoweredUSB Hub
Connections
6
2.4.2 Host Connector
The connection to the host computer is achieved via a standard USB 2.0 certified Hi-Speed “A” to
“B” cable that is included in the Accessory Kit, or with any equivalent USB 2.0 certified Hi-Speed
cable. Refer to the
Section 2.1, "Product Components List" for information about the Accessory Kit.
Figure 2-6. Host connector with strain relief
2.4.3 PoweredUSB Connections
The PoweredUSB connections are standard USB “A” connectors with four extra pins to supply
higher voltages. See
Figure 2-8 for an illustration. The lower portion of the “A” connector side on
this product can be used alone, without the locking PoweredUSB connector.