Revel M12 - Manual (Page 13)

13
REVEL Concerta M12
Owner’s Manual
Making Connections
(continued)
Maximum Wire Gauge
Gauge Length Length
(AWG) (Feet) (Meters)
6 87 27
7 69 21
8 58 18
9 43 13
10 34 10
11 27 8
12 22 7
13 17 5
14 14 4
15 11 3
16 9 3
17 7 2
18 5 2
Note
High loop resistances that exceed 0.07ohms
(for each wire run) will cause the filter
network to mis-terminate, resulting in
considerable degradation of sound quality.
• Review the owner’s manuals for
associated audio components to
determine their connection procedures.
• If you have questions about the suit-
ability of associated power amplifier com-
ponents, contact an authorized Revel
dealer for information.
CONNECTIONS
Connections are made between one M12
input connector and one power amplifier
output connector as shown in Figure 9
(below).
To make connections:
1. Connect one pair of loudspeaker wires
to the M12 input connectors. Then,
connect the same pair of loudspeaker
wires to the desired power amplifier
output connector.
2. Repeat step 1 to connect the second
M12 to a separate power amplifier out-
put connector.
Figure 9: Connections