Revel M12 - Manual (Page 10)

10
REVEL Concerta M12
Owner’s Manual
• If desired, use a pair of Revel Performa
22 Pedestals to solidly mount the
speakers at an ideal height for seated
listeners, with the front of the M12
facing the listening position as shown
in Figure 6 (below). The tweeter should
be at approximately the same height
as the listener’s ears. The bottom of the
M12 cabinet has threaded inserts to
accomodate secure fastening to the
stand.
Note
For pedestal assembly instructions, refer to
the Revel Performa Pedestal 22 Assembly
Instructions that are included with the
pedestal stand.
To attach to a pedestal stand:
1. Assemble the pedestal stand.
2. Place the M12 on its side on a soft
towel or carpeted floor.
3. Locate the four threaded inserts on the
bottom of the cabinet. These inserts are
identified in Figure 7 (below).
4. Fasten the M12 to the pedestal stand
with screws.
5. Make sure the four screws are evenly
threaded to achieve a level balance.
6. When all screws have been tightened,
stand the mounted M12 (and stand) in
the upright position.
Note
The optional Revel Performa Pedestal 22 is
available at authorized Revel dealers.
Figure 5: Loudspeaker Placement
Figure 6: Placement on Pedestal
Figure 7: Threaded Inserts
Threaded
Inserts