beautypg.com

Step four, Step five, Step six – Revel C10 User Manual

Page 5

background image

5

Step Four

Using the included Allen wrench, remove the top and
bottom end caps of the speaker by unscrewing the
single center screw on bottom.

Step Five

Connect the wires (see page 6). Replace the end caps while
capturing the wall bracket between parts A and B of the
end cap, securing it in place.

Step Six

The wall-bracket design allows for rotation of the speakers
at angles of up to 30º of center. Position the speakers so
that they face toward the primary listening position, before
fully tightening.

End cap

1/4-20 x 3/4"
Screw

End cap

Wall-mount
end cap A

Wall-mount
end cap B

HSGP1053-C10_OM 9/12/08 12:29 PM Page 5

See also other documents in the category Revel Acoustics: