Reloop IPHONO 2 - Manual (Page 10)

ENGLISH
10
oPeRATIoN MANUAL
ATTeNTIoN! For your own safety, please read this operation manual carefully before initial operation!
All persons involved in the installation, setting-up, operation, maintenance and service of this device
must be appropriately qualified and observe this operation manual in detail. This product complies
with the requirements of the applicable european and national regulations. conformity has been pro-
ven. The respective statements and documents are deposited at the manufacturer.
Congratulations on purchasing your Reloop iPhono 2. Thank you for placing your trust in our disc jockey
technology. Before operating this equipment we ask you to carefully study and observe all instructions.
Please remove the iPhono 2 from its packaging. Check before initial operation to make sure that the
device has not been visibly damaged during transport. If you detect any damage to the USB cable or the
casing, do not operate the device. Contact your specialised dealer.
SAFeTy INSTRUcTIoNS
cAUTIoN! Please exercise particular caution when handling power voltage. This voltage rating may
lead to a critical electrical shock! Any damage caused by the non-observance of this operation manual
excludes any warranty claims. The manufacturer is not liable for any damage to property or for perso-
nal injury caused by improper handling or non-observance of the safety instructions.
- This device left the factory in perfect condition. To maintain this condition and to ensure a risk-free ope-
ration the user must observe the safety instructions and warnings contained in this operation manual.
- For reasons of safety and certification (CE) the unauthorised conversion and/or modification of the
device is prohibited. Please note that in the event of damage caused by the manual modification to this
device any warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the exception of
wear parts that can be exchanged from the outside. Qualified staff must carry out maintenance, other-
wise the warranty does not apply!
- Ensure that the power will only be supplied after the device has been fully set up. Always plug in the
USB plug last.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened and cor-
rectly hooked up. Refer to your dealer if you have any questions.
- Ensure that when setting up the product the USB cable is not squashed or damaged by sharp edges.
- Prevent the USB cable from coming into contact with other cables! Exercise great care when handling
USB cables and connections. Never touch these parts with wet hands!
- Disconnect the device when not in use and before cleaning! Be sure to hold the USB plug by the body.
Never pull the USB cord!
- Position the device on a horizontal and stable low-flame base.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation make sure that the device is not exposed to excessive heat,
humidity, and dust. Be sure that no cables lie around openly. You will endanger your own safety and
that of others!
- Do not rest any containers filled with liquid that could easily spill onto the device or in its immediate
vicinity. If, however, fluids should access the inside of the device, immediately disconnect the USB plug.
Have the device checked by a qualified service technician before re-use. Damage caused by fluids inside
the device is excluded from the warranty.