RCBS X Die Product - Manual (Page 2)

IMPORTANT: READ THIS SECTION FIRST
Before using the RCBS X-Sizer die, read this instruction manual care-
fully to fully learn how to safely operate the related reloading equipment.
Failure to properly operate certain reloading equipment can result in
severe personal injury and/or equipment damage. If you have read
these instructions, but do not clearly understand the described opera-
tion, call us at 1-800-533-5000 and a technician will assist you.
This instruction manual contains specific safety and operating information.
It should be considered a permanent part of your reloading equipment and
remain with the equipment at all times for easy reference.
SAFETY
Reloading is an enjoyable and rewarding hobby that can be con-
ducted safely. But, as with any hobby, carelessness or negligence
can make reloading hazardous. This product has been designed
from the beginning with the user’s safety in mind. When reloading,
safety rules must be followed. By observing these rules, the chance
of a hazardous occurrence causing personal injury or property dam-
age is minimized.
GENERAL
• Use all equipment as the manufacturer recommends. Study
the instructions carefully and become thoroughly familiar
with the operation of the product. If you do not have written
instructions, request a copy from the equipment manufacturer.
• Do not take short cuts. Attempting to bypass established
procedures is an invitation to an accident.
• Observe “good housekeeping” in the reloading area. Keep
tools and components neat, clean and orderly. Promptly and
completely clean up primer and powder spills.
• Reload only when you can give your undivided attention. Do
not reload when fatigued or ill, or under the influence of
medications or alcohol. Develop a reloading routine to avoid
mistakes which may prove hazardous. Do not rush - load at a
leisurely pace.
• Always wear adequate eye protection to protect your eyes
from flying particles. You assume unnecessary risk when
reloading without wearing safety glasses.
LOADING DATA
• Use only laboratory tested reloading data. We highly recom-
mend the SPEER reloading manual and the RCBS.load
reloading software.
• OBSERVE ALL WARNINGS ABOUT THE USE OF MAXI-
MUM LISTED LOADS.