Opticron Smartphone Photoadapter - Manual (Page 2)

In order to deliver both a wide range of adapters to suit many models
of smartphone and to keep R&D and production costs to a minimum,
your adapter has been manufactured in the EU using the latest 3D
printing technology. As a result you may notice some variation in the
surface finish including vertical striping or differences in colour. This
is normal and does not affect the performance or durability of the
product.
Important Notes
Opticron smartphone adapters are NOT designed to be worn using
the supplied neck strap with your phone installed in the adapter. The
phone may slip out and could be damaged if dropped as a result. DO
NOT CARRY THE PHONE AROUND YOUR NECK IN THE ADAPTER.
The material used to make the adapter is NOT waterproof and may
absorb moisture if used in damp conditions. If this happens, please
dry the adapter after use at normal room temperature. Under no
circumstances should artificial heat sources (hair-dryers, ovens etc) be
used.
Adapter Features
The illustration below shows the main features of the Smartphone
adapter. Features may vary by type.
Attaching Your Smartphone
The illustrations opposite indicate how the adapter is installed onto
your telescope or binocular eyepiece.
Neck strap
attachment eyelet
Smartphone holder
Push-fit mounting
Camera lens
aperture
Part number and
compatibility information