Opticron 41111 Photoadapter - Manual

41111
PHOTO ADAPTER
PUSH FIT 44
41111
PHOTO ADAPTER
PUSH FIT 44
41111
Photoadapter Push Fit 44
User Guide
1213
3. If the eyepiece has a fold down
rubber eyecup, remove it.
4. Follow steps 4-8 under Assembly and
Fitting
Using the 41118 reducer sleeve
1. Make sure the correct eyepiece is
fitted securely to the telescope.
2. Remove rubber eyecup.
3. Unscrew the photoadapter and place
the locking ring over the eyepiece.
4. Fit the reducer sleeve directly onto
the eyepiece, making sure it’s inner
ridge makes contact with the outer
ridge on eyepiece.
5. Place the photoadapter over the
eyepiece and secure tightly to the
locking ring.
6. Follow steps 7-8 under Assembly and
Fitting
Notes
1. If you find the camera is at an odd angle
when attached - loosen the locking ring,
rotate the camera into line and re-tighten.
2. Focusing is facilitated on the telescope.
3. Camera may need to be operated in manual
mode with shutter locks disengaged where
necessary.
4. The high magnification to aperture ratios
result in slower shutter speeds compared with
conventional telephoto lenses so choose an
IS0 setting of 400. For 35mm SLRs 400 ASA
film is recommended. If possible use a cable
release or remote control to reduce camera
shake when operating the shutter.
For more information please contact:
Opticron, Unit 21, Titan Court,
Laporte Way, Luton, Beds LU4 8EF UK
Telephone: +44 (0)1582 726522
Email: [email protected]