Opticron LED Microstand - Manual (Page 2)

Microstand conversions increase basic
monocular magnification by a factor of 3.
Instructions:
(1) Screw the microstand into the objective lens
end of the gallery scope
(2) Attach the LED unit to the microstand
(3) Place the microstand centrally over the
object to be viewed
(4) Rotate the focusing band on the gallery
scope to bring the object into sharp focus
Specifications:
30259 3x Microstand with LED illuminator
Base area 62x55mm
Height 88mm. Weight 68g
LED (Light Emitting Diode)
Power source: CR2016 lithium batteries
Battery life: 16 hours
ø26mm x 34mm. Weight 13g
How to replace the battery:
(1) Unscrew knob from top of unit
(2) Remove the retaining spring clip from the
LED light unit
(3) Separate the unit into two pieces
(4) Replace both batteries
(5) Close the unit and retain it with the
spring clip
(6) Replace knob
Focusing band
Objective lens