Opticron Tracker 670 - Manual (Page 6)

Range and Angle Measurement Mode
Press ‘MODE’ button to change from Range to Range and Angle Mode. To begin
measurement, briefly press the power button. The distance measured will be shown
on the LCD.
In this mode the unit will simultaneously measure the angular distance to and
height of an individual target being observed.
To switch between measuring in metres and yards, press and hold the ‘MODE’
button for 2 seconds. The bottom left of the LCD will show ‘M’ or ‘Y’. To switch
back again, press and hold the ‘MODE’ button for a further 2 seconds.
The Tracker 670 will power off automatically if not used for 20 seconds.
6