Belkin F5D6001 - Manual (Page 17)

THE BELKIN WIRELESS NETWORK MONITOR UTILITY
15
Creating and Using a Profile
Profiles are automatically created when you connect to a network. From the
factory, Belkin has also created one profile called “Default”. This is a special
profile that will connect to the first wireless network that the Card detects. You
can remove this profile if you wish. If you want to create the default profile
again, simply create a profile with the name “Default” and the SSID is “ANY” (all
caps). Here is how:
1. Open the Utility.
2. Click the “Profiles” button. You will see the below screen.
3. Click “Add”. The following screen will appear.
P743056-D_F5D6001v3kMan8_03.qxd 9/5/03 4:58 PM Page 15