Knog STRONGMAN - Manual (Page 6)

MOUNT BRACKET 11 12
Loading Strongman into the Mount Bracket
Insert main body of the Strongman into the
large opening on the Mount Bracket. Load the
Strongman shackle into the body, through the
shackle hole on the Mount Bracket and lock
with the supplied Strongman key. Removing or re-positioning the Mount Bracket
Using a flat head screw-driver or similar flat
utensil, push into the small rectangular opening
located on the inside of the Mount Bracket to
disengage the internal ratcheting mechanism
and release the strap. Recommended locations for the Mount Bracket
The Mount Bracket fits best on the top tube
and down tube of the bicycle. Putting the
Mount Bracket on the Seat Tube is possible
but not highly recommended simply because
it is more likely to slide down over time.
Periodically check that your mount bracket is
securely fitted. PLEASE NOTE: The Strongman Bracket should
not have its strap tightened fully whilst not
mounted to the bike frame or tube.