beautypg.com

Т³гж 8, Operating instructions manual operation, Operating temperature – Klimaire KSIM Series User Manual User Manual

Page 8

background image

7

Manul operation can be used temporarily in case the remote controller is disable or maintenance
necessary.

OPERATING INSTRUCTIONS

Manual operation

NOTE: This manual does not include Remote Controller Operations, see the
<> packed with the unit for details.

Operating temperature

Mode

Cooling operation

Heating operation Drying operation

Temperature

1. If air conditioner is used outside of the above conditions, certain safety protection
features may come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please sets the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.

Suggestion: For the unit adopts an Electric Heater, when the outside ambient temperature is

O

below 0 C, we strongly recommend you to keep the machine plugged in order to guarantee it
running smoothly.

Room temperature

Outdoor temperature

O

>

62 F

O

O

64 F 122 F

O

<86 F

O

O

5 F 83 F

O

O

50 F 122 F

CAUTION:

~

~

~

O

O

(

5 F

122 F

:

For the models with

low temperature cooling system)

~

O

>50 F

Auto/Cool

Manual control

button

Front panel

Grasp both sides of the panel and pull it down,

O

the panel opened upward to an angle of 15 .
Push the panel upward and then lift it up.
One press of the manual control button will
lead to the forced AUTO operation. If press
the button twice within five seconds, the unit
will operate under forced COOL operation.
Close the panel firmly to its original
position.

This button is used for testing purposes
only. You had better not choose it.
To restore the remote controller operation,
use the remote controller directly.

CAUTION:

1

3

2

NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.