beautypg.com

Dsc programming – Blaupunkt BOLOGNA RCR 126 User Manual

Page 16

background image

31

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

DSC programming

DSC (Direct Software Control) allows you to
customise certain programmable, basic set-
tings to suit your personal needs and prefe-
rences and then store them.
The basic settings for this audio equipment
were made at the factory. In the following you
can find an overview of these settings, so that
you can always reset to these if desired.
If you wish to alter any of the programming,

press DSC.

The display will show you the adjusted con-
dition.
Use the rocker switch to select and adjust the
functions described in the following.

/

Select function
Adjust value
Adjust value +

TA VOL

To adjust the traffic an-
nouncement volume from
between 1 to 9. The mes-
sage will then come
through at this volume.
(1 = low)

BEEP

Confirmation tone for all
functions which require a
button to be pressed for
more than 2 seconds.
The volume can be adju-
sted from between 0 to 9.
(0 = off)
Each alteration of this va-
lue is confirmed by a beep
tone of the corresponding
volume.

LED (code)

You can adjust the LED

B

to flash for extra anti-theft
protection.

LED 1 - LED always flash-

es when the unit
has been swit-
ched off via the
ignition.

LED 0 - No flashing.

LOUD

Loudness - When listening
at a low level, the Loud-
ness function creates a
more natural sound by
boosting the low frequency
range.

LOUD 1 - Low boost

LOUD 6 - Max. boost

RM

(Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.

LOCAL

(lo)
To adjust the seek tuning
sensitivity for local recepti-
on.

LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity

DIS

(dx)
To adjust the seek tuning
sensitivity for distant recep-
tion.

DIS. 1- high sensitivity
DIS. 3- low sensitivity

To quit the DSC programming mode and
store the adjustment:

Press DSC.

If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.

BA Bolo RCR 126 gb®

03.06.2002, 13:38 Uhr

31