Kino Flo VG5R Ballast Board - Manual (Page 2)

Shorting Plug #6350014
Shorting Plug #6350006
6350014
6350006
CFX-W48-X120, CFX-W48-X230
IMG-20X-120, IMG-20X-230
IMG-40X-120, IMG-40X-230
IMG-80X-120, IMG-80X-230
All Non-DMX products that use(d) VG ballast boards
must use Shorting plug part #6350014 (included with
VG5R). Remove shorting plug for all DMX products.
The DMX wiring harness is used in its place.
HO/Std shorting plug, part #6350006, (sold separate-
ly), must be used on Non-HO/Std products (DMX or
Non-DMX) for proper ballast operation.In most cases,
the shorting plug may be removed from the ballast card
that is being replaced.
The following models did not have an HO/Std
setting. Therefore, need Shorting plug #6350006
to operate properly:
2