K-array KKS50 - Manual (Page 4)

KKS50
Acoustics
Speakers Power handling 300 W (AES)
Max Power 400 W 1
Impedance 8Ω or 32Ω (selectable)
Frequency range 60 Hz - 300 Hz.
SPL 1W / 1mt 92 dB 2
Maximum SPL 117 dB continuous - 123 dB peak
Coverage
Horizontal omni
Vertical omni
Crossover
Type External 24dB/oct. crossover required
Frequency low pass @300 Hz
Transducers
Full range 4 x 4” Neodymium magnet with 1.5” voice coil
Audio Input
Connectors 2 x 4-pin Speakon
Wiring CH.1 (1+ 1-) CH.2 (2+ 2-)
Selection Switch
Impedance 8Ω - 32Ω
Channel CH.1 - CH.2
Recommended
Type @32Ω KA10, KA10-10, KA40 (for up to 8 X KKS50/channel) (with dedicated preset)
Type @8Ω KA7, KA7-7, KA10, KA10-10, KA40 (with dedicated preset)
Physical
Dimensions 50 x 10.9 x 20,2 cm (19.69” x 4.29” x 7.95”)
Weight 7.6 Kg (16.76 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal, the reference signal is the one proposed
by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing products without previous
notice. Present systems may differ in some respects from those presented in
this brochure.
Accessories:
• K-KSFLY: KKS50 tilter for line array
applications
• K-KSLINK: KKS50-KKS50 hardware link
• K-KCLAMP: Clamp for hanging
• K-KWALL: Bracket for wall
• K-KWIRE: 2-channels link cable