Specifications kk52 – K-array KK102 User Manual
Page 20
KK52/KK102
REV. A
20
14. SPECIFICATIONS
KK52
Acoustics
Speakers power handling
200 W
(AES)
Max power
400 W
1
Impedance
16Ω or 64Ω (selectable)
Frequency range
150 Hz - 20 KHz.
SPL 1W / 1mt
95 dB
2
Maximum SPL
118 dB continuous - 124 dB peak
Coverage
Horizontal
110°
Vertical
10°- 60° (selectable)
Crossover
Type
External Crossover required
Frequency
High pass @150 Hz, 24 dB/oct suggested minimum
Transducers
Full range
8 x 2” Neodymium magnet with 0.75” voice coil
Power Audio Input
Connectors
2 x 4-pin Speakon
Wiring
1+ 1-
(signal IN & LINK);
2+ 2-
(through)
Selection Switch
Vertical pattern
Spoot - Flood
Impedance
16Ω - 64Ω
Physical
Dimensions
8.1 x 50 x 5.9 cm (3.19” x 19.7” x 2.32”)
Weight
2.3 kg (5.07 lbs)
1. Maximum RMS applicable power for a musical signal, the
reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing
products without previous notice. Present systems may differ
in some respects from those presented in this brochure.