K-array KK102 - Manual (Page 14)

KK52/KK102
REV. A 14
10. WIRING
11. PROTECTION CIRCUITRY
Kobra KK52 and KK102 internal wiring is designed to pick up audio power signal from pins 1+ / 1- of a NL4
connector. 2+ and 2- pins, such as 1+ and 1-, are directly wired from one socket to the other, so signal can
pass through multiple KK modules without additional external cabling.
Speakers are electrically protected from brief power overloads, within a reasonable range. Overloading the
speaker for extended periods of time can cause damage, so proper system design is strongly advised.