JK Audio RemoteAmp Two - Manual (Page 5)

8
FAQs
? Can I connect a microphone to the XLR
input jack?
! No, this input is line level only. You need to
connect your mic to a mixer or pre amp
first.
? Can I mix sound clips from my personal
audio player with the audio from my
mixing console?
! Yes, you can use both the balanced XLR
and unbalanced 3.5 mm inputs simultane-
ously. The Stereo Line In allows music or
other recordings to be mixed in with the au-
dio from your console.
? Can I connect this to my intercom unit?
! Yes, this headphone amplifier works well
when connected to a ClearCom, RTS or
Telex 3-pin XLR party line intercom link so
you can monitor the feed, even while listen-
ing to the 3.5 mm stereo input.
5
Features
1. This control will adjust the level of audio
from the XLR Line In jack.
2. This control will adjust the level of audio
from the 3.5 mm Stereo Line In jack.
3. This red LED indicates when the power is
turned on.
4. Press this Power button in to activate the
unit. Press again to turn the unit off.