JK Audio RemoteAmp Two User Manual
Page 2
2
JK Audio combines professional audio electron-
ics in a rugged new belt pack design.
RemoteAmp Two provides a listen only connec-
tion for mono IFB or for listening to full band-
width stereo music. Separate volume controls
for the XLR and 3.5 mm line input jacks allow a
simple mix of mono and stereo sources. The
XLR line level input accepts either a balanced
mono signal or a party line intercom feed
(listen-only). The 1/2 watt, 1/4” stereo head-
phone jack will cut through any crowd noise. Or
connect an IFB earpiece to the 3.5 mm stereo
earpiece jack.
Description
11
Specifications
Input:
Female XLR:
Line level, balanced
0 dBu nom
20 k ohms impedance
3.5 mm Line In:
Stereo line level, unbalanced
-10 dBu nom
20 k ohms impedance
Outputs:
1/4” Headphone: Stereo, 1/2 watt per channel
8 ohms impedance
3.5 mm Earpiece: Stereo, 40 mW
100 ohms impedance
Frequency Response: 20 Hz - 20 kHz
Size:
4.7” x 3.75” x 1.65”
(12 x 9.5 x 4.2 cm)
Weight:
10 ounces (275 grams)
Note: While RemoteAmp Two was designed to be very
rugged and durable, it is not waterproof and care should
be taken to keep the unit dry.