JK Audio innkeeper LTD - Manual (Page 5)

16
Specifications
Input
Send: Balanced Female XLR, 20k ohms,
500 mV RMS (-4 dBu nom.)
Output
Caller: Balanced Male XLR, 200 ohms,
500 mV RMS, -4 dBu nom, +14 dBu Max.
Remote Jack:
RJ-45
Phone Line Jack:
RJ-11C
Isolation: 1500
VAC
Ringer:
0.8B REN
Frequency Response:
Telephone side 200 Hz - 3600 Hz
Power:
120-240 VAC power supply (included)
Size:
7.6" x 5.3" x 1.5" (20 x 14 x 4 cm)
Weight:
2.7 pounds (1.2 kg)
5
Features—Front View
1. Call Button - Takes the phone line off hook - press this button
to answer a call or to direct a call from your phone through the
hybrid.
2. OH LED - Lit when you are on line with a call (off-hook). LED
will flicker when you have an incoming call.
3. Drop Button - Press this button to drop (hang up) a call.
4. Send LEDs - Indicate the signal level going out to the phone
line.
5. Power LED - Indicates that the unit is receiving power.
6. Caller LEDs - Indicate the signal level coming in from the
phone line, after the DSP.
7. Send Level - Recessed volume control adjusts the signal that
you are sending down the telephone line.
8. Caller Level - Recessed volume control adjusts the level of the
signal coming in from the telephone line, going out the “Caller”
XLR jack.
Figure 1: Front View
1 2 3 4
5 6 7 8