JK Audio Inline Patch - Manual (Page 4)

4
Connection (continued)
Inline Patch
To digital or
PBX Wall Jack
To Data /
Modem Port
on phone
Analog Telephone
Digital or PBX
Telephone
Audio Equipment
To send audio into
phone line Powered Speakers or audio
equipment to receive audio
from phone line
Setup for use with PBX phone systems:
Setup for use with PBX phone systems is the same as for
analog telephones with one exception. Instead of connecting
the Phone Line jack of the Inline Patch to a wall jack, you will
connect to the data / modem jack on your PBX phone. You
will still need a regular analog telephone connected to the
Phone jack of the Inline Patch. When dialing out you will
need to take the necessary steps to get a direct connection to
the main analog phone line (example: dialing 9 + 1 + phone
number). You will not physically use your PBX phone while
operating the Inline Patch. It simply acts as your connection
to the telephone line. Dialing, speaking, etc. will be done
through the separate analog telephone.
9
FAQ’s
? I'm using a CD player with an Inline Patch to send audio
down the phone line and then recording that audio with
the caller's comments. The CD audio is overpowering the
caller audio even when I turn the "From Phone" control all
the way down. What's wrong?
!
The "From Phone" control only adjusts the output of your
voice that is sent through your telephone. The audio you
are feeding into the inputs on the back of the Inline Patch
comes back mixed with the caller's voice. The Inline Patch
does not attempt to separate audio sent into the inputs,
only your voice sent through your telephone. You'll have
to lower the "Send" level on the Inline Patch to correct this
problem.
? Can I connect the Inline Patch directly to my multi-line,
PBX or ISDN phone system wall jack?
!
NO! Connecting the Inline Patch to anything other than
a single line POTS (analog) phone line or emulated
analog phone line could irreversibly damage the unit.
If you do not know what type of phone line you have,
it is best to err on the side of caution and not connect
it. Call our technical support department and we will
assist you. Page 4 of this user guide illustrates how you
may use the Inline Patch if you do not have an analog line.